6205-2RS Deep Groove Ball Bearing for Food & Beverage
Used in stainless steel pillow blocks on food conveyors and in mixer gearboxes. Must resist daily washdown with caustic cleaning chemicals.
Function
Supports radial and light axial loads on rotating shafts with minimal friction and maintenance.
Specifications
| Specification | Value |
|---|---|
| Bore Diameter | 25mm |
| Outer Diameter | 52mm |
| Width | 15mm |
| Dynamic Load Rating | 14,000N |
| Static Load Rating | 7,800N |
| Maximum Speed (Grease) | 11,000RPM |
| Seal Type | 2RS (Contact Rubber) |
Industry-Specific Information
Maintenance Interval
2,000-4,000 hours or quarterly, whichever comes first. Relubrication with H1 grease during CIP downtime.
Common Failure Modes
Lubricant washout, corrosion from cleaning chemicals, contamination from product ingress, premature wear from insufficient lubrication
Replacement Indicators
Audible noise during operation, visible corrosion on housing, grease leakage (contamination risk), rough rotation when turned by hand
Compliance Requirements
FDA 21 CFR 178.3570 for lubricants, NSF H1 registration, 3-A Sanitary Standards where applicable
Installation Notes
Install with housings oriented for drainage. Use NSF H1 registered grease only. Protect from direct high-pressure spray during washdown. Document lubrication in HACCP records.